Carestream Roller Transport Clean Up Film

USD $291.02

Cleanup Film can help to remove precipitates, dirt, and other materials that may be deposited on the transport mechanism. We recommend using Cleanup Film after the process has been left idle overnight or for an extended period of time – more than 4 hours. We also recommend using the film each morning, after start-up. Run one sheet of film through the processor. •Sheets may be fed through the machine either side up, as both sides have the same cleaning capabilities.


This film is not recommended for use in Carestream X-OMAT 270 RA, 460 RA, and 480 RA Processors, or in Carestream X-OMAT Multiloader 300 and 700 room light film-handling systems. The density of the film is not picked up by the sensors in this equipment.

Reuse of the sheets is not recommended due to the possibility of chemical contamination and redeposit of precipitates, dirt, etc. back onto the roller surfaces.

Comes in 100 sheets of 35 x 43 cm film.

Additional information

Weight 8.8 lbs
Dimensions 17.5 × 14 × 2 in